Webinar – Debugging DC Voltage Lines
Summary
The prosaic DC power supply is receiving more and more scrutiny as supply voltages continue to get smaller. Supply tolerances are getting tighter as users try to decrease power, increase yield and minimize supply induced signal noise.
This webinar will discuss tools and techniques for making power integrity measurements such as ripple, noise, spikes, compression, static/dynamic load response and supply induced signal noise and signal jitter. Also learn about the effects of oscilloscope noise, probe noise, probe attenuation ratio, offset range, input range, connection technique and measuring supply/signal crosstalk.
In this webinar, you’ll learn how to:
- Debug and test power distribution networks (PDN) with more precision, accuracy, and confidence
- More easily isolate the root cause of PDN noise
- Avoid false negative/false positive test results
- Use specialized tools that can make your job easier
Speakers
Product Marketing Manager
Keysight Technologies
Alan Wadsworth is currently responsible for marketing Keysight’s oscilloscope, Pathwave software, semiconductor and power products. Alan has over 30 years of industry experience in both design and test. He is also the author of Keysight’s 277-page Parametric Measurement Handbook.
Alan joined Hewlett Packard in 1991 and worked for five years as the SRAM engineer in HP’s Memory Technology Center, which was part of Corporate Procurement. Prior to that Alan worked as an integrated circuit designer at Signetics/Philips for nine years where he designed circuits in both bipolar and BiCMOS technologies.
Alan holds bachelors and masters degrees in electrical engineering from the Massachusetts Institute of Technology and an MBA from Santa Clara University.
Additional Details
Preis -
Link zur Veranstaltungsseite - https://event.on24.com/eventRegistration/EventLobbyServlet?target=reg20.jsp&partnerref=WWKcom&eventid=1858774&sessionid=1&key=DE79D3AC342DE4A760178ECEB06622A9®Tag=389715&sourcepage=register
